#include "dialogalgoarg.h"
#include "ui_dialogalgoarg.h"
#include "workpiecesizeactions.h"
#include <QPushButton>
#include <QDoubleValidator>
#include <QGroupBox>
#include <QtMath>
#include <QTableWidget>
#include <QHeaderView>
#include <QColor>
#include <QComboBox>
#include <QPersistentModelIndex>
#include <algorithm>
#include <cmath>
#include "HandEyeCalibWidget.h"
#include "PathManager.h"
#include "StyledMessageBox.h"
#include "ToolExtrinsicWidget.h"
#include "NetworkConfigWidget.h"
#include "PointCloudFilterWidget.h"
#include "workpiecesizeactions.h"

#include "VrLog.h"

namespace
{

const int kHandEyeConfigIndex = 1;

bool isIdentityMatrix(const double matrix[16])
{
    for (int index = 0; index < 16; ++index)
    {
        const double expected = (index / 4 == index % 4) ? 1.0 : 0.0;
        if (qAbs(matrix[index] - expected) > 1e-9)
        {
            return false;
        }
    }
    return true;
}

}

DialogAlgoarg::DialogAlgoarg(ConfigManager* configManager, QWidget *parent)
    : QDialog(parent)
    , ui(new Ui::DialogAlgoarg)
    , m_pConfigManager(configManager)
    , m_handEyeCalibWidget(nullptr)
    , m_toolExtrinsicWidget(nullptr)
{
    try {
        ui->setupUi(this);
        m_pointCloudFilterWidget = ui->pointCloudFilterWidget;

        if (ui->lineEdit_spacerLength)
        {
            ui->lineEdit_spacerLength->setValidator(
                new QDoubleValidator(0.0, 1e6, 6, ui->lineEdit_spacerLength));
        }
        if (ui->lineEdit_spacerWidth)
        {
            ui->lineEdit_spacerWidth->setValidator(
                new QDoubleValidator(0.0, 1e6, 6, ui->lineEdit_spacerWidth));
        }
        if (ui->lineEdit_layerRatio) ui->lineEdit_layerRatio->setValidator(new QDoubleValidator(-1.0, 10.0, 6, ui->lineEdit_layerRatio));
        if (ui->lineEdit_distToSideRatio) ui->lineEdit_distToSideRatio->setValidator(new QDoubleValidator(0.0, 10.0, 6, ui->lineEdit_distToSideRatio));
        if (ui->lineEdit_groundRemoveOffset) ui->lineEdit_groundRemoveOffset->setValidator(new QDoubleValidator(-1e6, 1e6, 6, ui->lineEdit_groundRemoveOffset));
        InitHandEyeCalibTab();
        InitNetworkConfigTab();
        InitToolExtrinsicTab();
        initWorkpieceSizesTab();
        initModelParamsTab();

        // 隐藏标题栏
        // setWindowFlags(Qt::FramelessWindowHint);

        // 获取配置文件路径
        m_configFilePath = PathManager::GetInstance().GetConfigFilePath();

        // 检查配置文件路径是否有效
        if (m_configFilePath.isEmpty()) {
            StyledMessageBox::critical(this, "错误", "无法获取配置文件路径！");
            return;
        }

        // 从配置文件加载数据到界面
        LoadConfigToUI();

    } catch (const std::exception& e) {
        StyledMessageBox::critical(this, "初始化错误", QString("对话框初始化失败: %1").arg(e.what()));
    } catch (...) {
        StyledMessageBox::critical(this, "初始化错误", "对话框初始化失败！（未知错误）");
    }
}

DialogAlgoarg::~DialogAlgoarg()
{
    delete ui;
}

void DialogAlgoarg::LoadConfigToUI()
{
    if (!m_pConfigManager) {
        StyledMessageBox::critical(this, "错误", "配置对象未初始化！");
        return;
    }

    try {
        // 从ConfigManager获取配置数据
        ConfigResult configData = m_pConfigManager->GetConfigResult();
        loadPointCloudFilterConfig(configData);

        // 检查配置文件路径是否有效
        if (m_configFilePath.isEmpty()) {
            LOG_WARNING("Config file path is empty\n");
        }

        const VrToolParam& toolParam = configData.algorithmParams.toolParam;
        LoadModelDetectionParamsToUI(configData.algorithmParams);
        LoadBinDetectionParamsToUI(configData.algorithmParams.binParam);
        LoadRotorCoreParamsToUI(configData.algorithmParams.rotorCoreParam);
        if (m_toolExtrinsicWidget) {
            m_toolExtrinsicWidget->setData(
                toolParam.eulerOrder,
                toolParam.rotX, toolParam.rotY, toolParam.rotZ,
                toolParam.offsetX, toolParam.offsetY, toolParam.offsetZ);
        }

        // 加载网络配置（JSON TCP 端口 + Modbus 寄存器地址）
        LoadPlcRobotServerConfigToUI(configData.plcRobotServerConfig);

        LoadHandEyeCalibConfig();

    } catch (const std::exception& e) {
        LOG_ERROR("Exception in LoadConfigToUI: %s\n", e.what());
        StyledMessageBox::warning(this, "警告",
            QString("加载配置时发生异常: %1\n将使用默认参数显示").arg(e.what()));

        ConfigResult configData;
        loadPointCloudFilterConfig(configData);
        LoadModelDetectionParamsToUI(configData.algorithmParams);
        LoadBinDetectionParamsToUI(configData.algorithmParams.binParam);
        LoadRotorCoreParamsToUI(configData.algorithmParams.rotorCoreParam);
        const VrToolParam& toolParam = configData.algorithmParams.toolParam;
        if (m_toolExtrinsicWidget) {
            m_toolExtrinsicWidget->setData(
                toolParam.eulerOrder,
                toolParam.rotX, toolParam.rotY, toolParam.rotZ,
                toolParam.offsetX, toolParam.offsetY, toolParam.offsetZ);
        }
    } catch (...) {
        LOG_ERROR("Unknown exception in LoadConfigToUI\n");
        StyledMessageBox::warning(this, "警告", "加载配置文件失败（未知错误），将使用默认参数显示");

        ConfigResult configData;
        loadPointCloudFilterConfig(configData);
        LoadModelDetectionParamsToUI(configData.algorithmParams);
        LoadBinDetectionParamsToUI(configData.algorithmParams.binParam);
        LoadRotorCoreParamsToUI(configData.algorithmParams.rotorCoreParam);
        const VrToolParam& toolParam = configData.algorithmParams.toolParam;
        if (m_toolExtrinsicWidget) {
            m_toolExtrinsicWidget->setData(
                toolParam.eulerOrder,
                toolParam.rotX, toolParam.rotY, toolParam.rotZ,
                toolParam.offsetX, toolParam.offsetY, toolParam.offsetZ);
        }
    }
}

void DialogAlgoarg::InitToolExtrinsicTab()
{
    if (!ui || m_toolExtrinsicWidget)
    {
        return;
    }

    m_toolExtrinsicWidget = ui->toolExtrinsicWidget;
    m_toolExtrinsicWidget->setCameraSelectorVisible(false);
    m_toolExtrinsicWidget->setTargetOffsetVisible(true);
    m_toolExtrinsicWidget->setAxialAngleRangeVisible(false);
}

void DialogAlgoarg::InitHandEyeCalibTab()
{
    if (!ui || m_handEyeCalibWidget)
    {
        return;
    }

    m_handEyeCalibWidget = ui->handEyeCalibWidget;
    m_handEyeCalibWidget->setMatrixEditable(true);
    m_handEyeCalibWidget->setDefaultCalibType(0);
    m_handEyeCalibWidget->setDefaultFilePath(
        PathManager::GetInstance().GetAppConfigDirectory());

    QVector<HandEyeCalibCameraInfo> cameraList;
    HandEyeCalibCameraInfo cameraInfo;
    cameraInfo.cameraIndex = kHandEyeConfigIndex;
    cameraInfo.displayName = QStringLiteral("手眼标定");
    cameraList.append(cameraInfo);
    m_handEyeCalibWidget->setCameraList(cameraList);
    m_handEyeCalibWidget->setCalibType(kHandEyeConfigIndex, 0);

    connect(m_handEyeCalibWidget, &HandEyeCalibWidget::calibMatrixLoaded,
            this, &DialogAlgoarg::onCalibMatrixLoaded);
    connect(m_handEyeCalibWidget, &HandEyeCalibWidget::saveCalibRequested,
            this, &DialogAlgoarg::onSaveCalibRequested);
}

void DialogAlgoarg::InitNetworkConfigTab()
{
    if (!ui || m_networkConfigWidget)
    {
        return;
    }

    m_networkConfigWidget = ui->networkConfigWidget;
    m_networkConfigWidget->setExtrinsicControlsVisible(false);
    m_networkConfigWidget->setPoseOutputOrderVisible(true);

    if (QGroupBox* group = m_networkConfigWidget->findChild<QGroupBox*>("groupPlc")) {
        group->setTitle(QStringLiteral("TCP端口与Modbus寄存器配置"));
    }
    const char* hideNames[] = {"labelPlcIp", "editPlcIp", "labelPlcPort", "editPlcPort"};
    for (const char* name : hideNames) {
        if (QWidget* widget = m_networkConfigWidget->findChild<QWidget*>(name)) {
            widget->hide();
        }
    }

}

void DialogAlgoarg::loadPointCloudFilterConfig(const ConfigResult& configResult)
{
    if (!m_pointCloudFilterWidget)
    {
        return;
    }

    QVector<PointCloudFilterCameraInfo> cameras;
    const int cameraCount = std::max(1, static_cast<int>(configResult.cameraList.size()));
    for (int cameraIndex = 1; cameraIndex <= cameraCount; ++cameraIndex)
    {
        PointCloudFilterCameraInfo camera;
        camera.cameraIndex = cameraIndex;
        if (cameraIndex <= static_cast<int>(configResult.cameraList.size()))
        {
            camera.displayName = QString::fromStdString(configResult.cameraList[cameraIndex - 1].name);
        }
        if (camera.displayName.isEmpty())
        {
            camera.displayName = QStringLiteral("相机 %1").arg(cameraIndex);
        }
        cameras.append(camera);
    }
    m_pointCloudFilterWidget->setCameraList(cameras);

    for (int cameraIndex = 1; cameraIndex <= cameraCount; ++cameraIndex)
    {
        PointCloudFilterData data;
        for (const VrPointCloudFilterParam& param : configResult.algorithmParams.pointCloudFilterParams)
        {
            if (param.cameraIndex == cameraIndex)
            {
                data.enabled = param.enabled;
                data.minX = param.minX;
                data.maxX = param.maxX;
                data.minY = param.minY;
                data.maxY = param.maxY;
                data.minZ = param.minZ;
                data.maxZ = param.maxZ;
                break;
            }
        }
        m_pointCloudFilterWidget->setData(cameraIndex, data);
    }
}

bool DialogAlgoarg::savePointCloudFilterConfig(ConfigResult& configResult)
{
    if (!m_pointCloudFilterWidget)
    {
        return false;
    }

    std::vector<VrPointCloudFilterParam> filterParams;
    const int cameraCount = std::max(1, static_cast<int>(configResult.cameraList.size()));
    for (int cameraIndex = 1; cameraIndex <= cameraCount; ++cameraIndex)
    {
        PointCloudFilterData data;
        if (!m_pointCloudFilterWidget->getData(cameraIndex, data))
        {
            return false;
        }
        if (data.minX > data.maxX || data.minY > data.maxY || data.minZ > data.maxZ)
        {
            StyledMessageBox::warning(this, QStringLiteral("点云过滤"),
                QStringLiteral("相机 %1 的过滤范围下限不能大于上限！").arg(cameraIndex));
            return false;
        }

        VrPointCloudFilterParam param;
        param.cameraIndex = cameraIndex;
        if (cameraIndex <= static_cast<int>(configResult.cameraList.size()))
        {
            param.cameraName = configResult.cameraList[cameraIndex - 1].name;
        }
        param.enabled = data.enabled;
        param.minX = data.minX;
        param.maxX = data.maxX;
        param.minY = data.minY;
        param.maxY = data.maxY;
        param.minZ = data.minZ;
        param.maxZ = data.maxZ;
        filterParams.push_back(param);
    }
    configResult.algorithmParams.pointCloudFilterParams = filterParams;
    return true;
}

bool DialogAlgoarg::SaveConfigFromUI()
{
    if (!m_pConfigManager) {
        return false;
    }

    try {
        // 获取当前配置
        SystemConfig systemConfig = m_pConfigManager->GetConfig();
        if (!savePointCloudFilterConfig(systemConfig.configResult))
        {
            return false;
        }
        VrToolParam& toolParam = systemConfig.configResult.algorithmParams.toolParam;
        if (!SaveModelDetectionParamsFromUI(systemConfig.configResult.algorithmParams)) {
            StyledMessageBox::warning(this, "错误", "模型检测参数输入有误，请检查！");
            return false;
        }
        if (!SaveBinDetectionParamsFromUI(systemConfig.configResult.algorithmParams.binParam)) {
            StyledMessageBox::warning(this, "错误", "料框检测参数输入有误，请检查！");
            return false;
        }
        if (!SaveRotorCoreParamsFromUI(systemConfig.configResult.algorithmParams.rotorCoreParam)) {
            StyledMessageBox::warning(this, "错误", "转子钢芯算法参数输入有误，请检查！");
            return false;
        }
        if (!m_toolExtrinsicWidget || !m_toolExtrinsicWidget->hasAcceptableInput()) {
            StyledMessageBox::warning(this, "错误", "工具参数输入有误，请检查！");
            return false;
        }
        m_toolExtrinsicWidget->getData(
            toolParam.eulerOrder,
            toolParam.rotX, toolParam.rotY, toolParam.rotZ,
            toolParam.offsetX, toolParam.offsetY, toolParam.offsetZ);

        // 保存网络配置（JSON TCP 端口 + Modbus 寄存器地址）
        if (!SavePlcRobotServerConfigFromUI(systemConfig.configResult.plcRobotServerConfig)) {
            StyledMessageBox::warning(this, "错误", "网络配置输入有误，请检查！");
            return false;
        }

        // 保存手眼标定矩阵到配置
        if (!SaveCalibMatrixToConfig(systemConfig.configResult.handEyeCalibMatrix)) {
            StyledMessageBox::warning(this, "错误", "手眼标定矩阵输入有误，请检查！");
            return false;
        }

        // 更新并保存配置到文件
        if (!m_pConfigManager->UpdateFullConfig(systemConfig)) {
            return false;
        }

        return m_pConfigManager->SaveConfigToFile(m_configFilePath.toStdString());

    } catch (const std::exception&) {
        return false;
    }
}

void DialogAlgoarg::LoadModelDetectionParamsToUI(const VrAlgorithmParams& algorithmParams)
{
    if (!ui || !ui->tableWidget_modelParams) {
        return;
    }
    ui->tableWidget_modelParams->setRowCount(0);
    ui->doubleSpinBox_targetGray->setValue(algorithmParams.modelGraySelection.targetGray);
    ui->doubleSpinBox_maxGrayDeviation->setValue(algorithmParams.modelGraySelection.maxGrayDeviation);
    const VrModelDetectionRegion& region = algorithmParams.modelDetectionRegion;
    ui->groupBox_modelDetectionRegion->setChecked(region.enabled);
    ui->spinBox_modelRegionLeft->setValue(region.left);
    ui->spinBox_modelRegionTop->setValue(region.top);
    ui->spinBox_modelRegionRight->setValue(region.right);
    ui->spinBox_modelRegionBottom->setValue(region.bottom);
    const std::vector<VrWorkpieceModelParam> modelParams = algorithmParams.modelParams.empty()
        ? std::vector<VrWorkpieceModelParam>{VrWorkpieceModelParam()}
        : algorithmParams.modelParams;
    for (const auto& modelParam : modelParams)
    {
        addModelParamRow(modelParam);
    }
    refreshModelParamRows();
}

void DialogAlgoarg::LoadBinDetectionParamsToUI(const VrBinParam& binParam)
{
    Q_UNUSED(binParam);
}

bool DialogAlgoarg::SaveBinDetectionParamsFromUI(VrBinParam& binParam)
{
    Q_UNUSED(binParam);
    return true;
}

void DialogAlgoarg::LoadRotorCoreParamsToUI(const VrRotorCoreParam& rotorParam)
{
    loadWorkpieceSizes(rotorParam);
    if (!ui || !ui->lineEdit_spacerLength || !ui->lineEdit_spacerWidth ||
        !ui->lineEdit_layerRatio || !ui->lineEdit_distToSideRatio ||
        !ui->lineEdit_groundRemoveOffset) {
        return;
    }
    ui->lineEdit_spacerLength->setText(QString::number(rotorParam.spacerLength, 'f', 6));
    ui->lineEdit_spacerWidth->setText(QString::number(rotorParam.spacerWidth, 'f', 6));
    ui->lineEdit_layerRatio->setText(QString::number(rotorParam.layerRatio, 'f', 6));
    ui->lineEdit_distToSideRatio->setText(QString::number(rotorParam.distToSideRatio, 'f', 6));
    ui->lineEdit_groundRemoveOffset->setText(QString::number(rotorParam.groundRemoveOffset, 'f', 6));
    ui->comboBox_toolNormalMode->setCurrentIndex(rotorParam.useGroundCalibNormal == 1 ? 1 : 0);
}

bool DialogAlgoarg::SaveRotorCoreParamsFromUI(VrRotorCoreParam& rotorParam)
{
    if (!saveWorkpieceSizes(rotorParam))
    {
        return false;
    }
    if (!ui || !ui->lineEdit_spacerLength || !ui->lineEdit_spacerWidth ||
        !ui->lineEdit_layerRatio || !ui->lineEdit_distToSideRatio ||
        !ui->lineEdit_groundRemoveOffset) {
        return false;
    }

    bool ok = false;
    rotorParam.spacerLength = ui->lineEdit_spacerLength->text().toDouble(&ok);
    if (!ok || rotorParam.spacerLength <= 0.0)
    {
        return false;
    }
    rotorParam.spacerWidth = ui->lineEdit_spacerWidth->text().toDouble(&ok);
    if (!ok || rotorParam.spacerWidth <= 0.0)
    {
        return false;
    }
    rotorParam.layerRatio = ui->lineEdit_layerRatio->text().toDouble(&ok);
    // -1 表示现场未配置分层系数；其余负数没有业务含义。
    if (!ok || (rotorParam.layerRatio != -1.0 && rotorParam.layerRatio <= 0.0)) return false;
    rotorParam.distToSideRatio = ui->lineEdit_distToSideRatio->text().toDouble(&ok);
    if (!ok || rotorParam.distToSideRatio <= 0.0) return false;
    rotorParam.groundRemoveOffset = ui->lineEdit_groundRemoveOffset->text().toDouble(&ok);
    if (!ok) return false;
    // .ui 选项顺序与算法约定一致：0=工件自身法向，1=调平后的地面法向。
    const int normalMode = ui->comboBox_toolNormalMode->currentIndex();
    if (normalMode != 0 && normalMode != 1)
    {
        return false;
    }
    rotorParam.useGroundCalibNormal = normalMode;
    return true;
}

void DialogAlgoarg::initWorkpieceSizesTab()
{
    // 页面和编辑触发方式定义在 .ui，此处只连接数据操作。
    connect(ui->btn_workpieceAdd, &QPushButton::clicked, this, [this]()
    {
        if (ui->tableWidget_workpieceSizes->rowCount() >= 65535)
        {
            return;
        }
        const int defaultRow = ui->comboBox_defaultWorkpiece->currentIndex();
        addWorkpieceSizeRow(VrRotorWorkpieceSize());
        refreshWorkpieceRows(defaultRow);
        ui->tableWidget_workpieceSizes->selectRow(ui->tableWidget_workpieceSizes->rowCount() - 1);
    });
}

void DialogAlgoarg::removeWorkpieceRow(int row)
{
    const int count = ui->tableWidget_workpieceSizes->rowCount();
    if (row < 0 || row >= count || count <= 1)
    {
        return;
    }
    int defaultRow = ui->comboBox_defaultWorkpiece->currentIndex();
    if (defaultRow == row)
    {
        defaultRow = 0;
    }
    else if (defaultRow > row)
    {
        --defaultRow;
    }
    ui->tableWidget_workpieceSizes->removeRow(row);
    refreshWorkpieceRows(defaultRow);
    ui->tableWidget_workpieceSizes->selectRow(std::min(row, ui->tableWidget_workpieceSizes->rowCount() - 1));
}

void DialogAlgoarg::addWorkpieceSizeRow(const VrRotorWorkpieceSize& size)
{
    const int row = ui->tableWidget_workpieceSizes->rowCount();
    ui->tableWidget_workpieceSizes->insertRow(row);
    auto* index = new QTableWidgetItem(QString::number(row + 1));
    index->setFlags(index->flags() & ~Qt::ItemIsEditable);
    ui->tableWidget_workpieceSizes->setItem(row, 0, index);
    for (int column = 1; column <= 2; ++column)
    {
        const double dimension = column == 1 ? size.radius : size.height;
        // 使用文本项，双击时由 Qt 提供普通文本编辑器，不创建数值步进控件。
        ui->tableWidget_workpieceSizes->setItem(row, column,
            new QTableWidgetItem(QString::number(dimension, 'g', 15)));
    }
    auto* actions = new WorkpieceSizeActions(ui->tableWidget_workpieceSizes);
    ui->tableWidget_workpieceSizes->setCellWidget(row, 3, actions);
    // 持久索引跟随删除后的行号变化，按钮始终操作所在行，不依赖选中行。
    const QPersistentModelIndex rowIndex(ui->tableWidget_workpieceSizes->model()->index(row, 0));
    connect(actions, &WorkpieceSizeActions::moveRequested, this, [this, rowIndex](int offset)
    {
        if (rowIndex.isValid())
        {
            moveWorkpieceRow(rowIndex.row(), offset);
        }
    });
    connect(actions, &WorkpieceSizeActions::removeRequested, this, [this, rowIndex]()
    {
        if (rowIndex.isValid())
        {
            removeWorkpieceRow(rowIndex.row());
        }
    });
}

void DialogAlgoarg::refreshWorkpieceRows(int defaultRow)
{
    ui->comboBox_defaultWorkpiece->clear();
    for (int row = 0; row < ui->tableWidget_workpieceSizes->rowCount(); ++row)
    {
        ui->tableWidget_workpieceSizes->item(row, 0)->setText(QString::number(row + 1));
        ui->comboBox_defaultWorkpiece->addItem(QString::number(row + 1), row + 1);
    }
    ui->comboBox_defaultWorkpiece->setCurrentIndex(defaultRow >= 0 ? defaultRow : 0);
    updateWorkpieceActions();
}

void DialogAlgoarg::updateWorkpieceActions()
{
    const int count = ui->tableWidget_workpieceSizes->rowCount();
    for (int row = 0; row < count; ++row)
    {
        auto* actions = qobject_cast<WorkpieceSizeActions*>(ui->tableWidget_workpieceSizes->cellWidget(row, 3));
        if (actions)
        {
            actions->setRowPosition(row, count);
        }
    }
    ui->btn_workpieceAdd->setEnabled(count < 65535);
}

void DialogAlgoarg::moveWorkpieceRow(int row, int offset)
{
    const int targetRow = row + offset;
    if (row < 0 || targetRow < 0 || targetRow >= ui->tableWidget_workpieceSizes->rowCount())
    {
        return;
    }
    int defaultRow = ui->comboBox_defaultWorkpiece->currentIndex();
    for (int column = 1; column <= 2; ++column)
    {
        auto* source = ui->tableWidget_workpieceSizes->takeItem(row, column);
        auto* target = ui->tableWidget_workpieceSizes->takeItem(targetRow, column);
        ui->tableWidget_workpieceSizes->setItem(row, column, target);
        ui->tableWidget_workpieceSizes->setItem(targetRow, column, source);
    }
    // 默认工件跟随尺寸项移动，序号始终对应新的行顺序。
    if (defaultRow == row)
    {
        defaultRow = targetRow;
    }
    else if (defaultRow == targetRow)
    {
        defaultRow = row;
    }
    refreshWorkpieceRows(defaultRow);
    ui->tableWidget_workpieceSizes->selectRow(targetRow);
}

void DialogAlgoarg::loadWorkpieceSizes(const VrRotorCoreParam& rotorParam)
{
    ui->tableWidget_workpieceSizes->setRowCount(0);
    int defaultRow = -1;
    for (const auto& size : rotorParam.workpieceSizes)
    {
        if (size.index == rotorParam.defaultWorkpieceIndex)
        {
            defaultRow = ui->tableWidget_workpieceSizes->rowCount();
        }
        addWorkpieceSizeRow(size);
    }
    refreshWorkpieceRows(defaultRow);
    if (!rotorParam.isWorkpieceListValid())
    {
        StyledMessageBox::warning(this, "工件尺寸", "尺寸列表存在无效参数，请检查尺寸和默认工件后保存。");
    }
}

bool DialogAlgoarg::saveWorkpieceSizes(VrRotorCoreParam& rotorParam)
{
    VrRotorCoreParam updated = rotorParam;
    updated.workpieceSizes.clear();
    updated.defaultWorkpieceIndex = ui->comboBox_defaultWorkpiece->currentData().toInt();
    for (int row = 0; row < ui->tableWidget_workpieceSizes->rowCount(); ++row)
    {
        VrRotorWorkpieceSize size;
        size.index = row + 1;
        bool radiusOk = false;
        bool heightOk = false;
        size.radius = ui->tableWidget_workpieceSizes->item(row, 1)->text().toDouble(&radiusOk);
        size.height = ui->tableWidget_workpieceSizes->item(row, 2)->text().toDouble(&heightOk);
        if (!radiusOk || !heightOk || !std::isfinite(size.radius) || !std::isfinite(size.height) ||
            size.radius <= 0.0 || size.height <= 0.0 || size.radius > 1e6 || size.height > 1e6)
        {
            StyledMessageBox::warning(this, "工件尺寸", QString("第 %1 项半径和高度必须为大于 0 且不超过 1000000 的数值。").arg(row + 1));
            return false;
        }
        updated.workpieceSizes.push_back(size);
    }
    VrRotorWorkpieceSize defaultSize;
    if (!updated.getWorkpieceSize(0, defaultSize))
    {
        StyledMessageBox::warning(this, "工件尺寸", "工件序号不能重复，默认序号必须在列表中，半径和高度必须大于 0。");
        return false;
    }
    // 同步旧字段便于配置兼容；检测始终按列表选择。
    updated.radius = defaultSize.radius;
    updated.height = defaultSize.height;
    rotorParam = updated;
    return true;
}

bool DialogAlgoarg::SaveModelDetectionParamsFromUI(VrAlgorithmParams& algorithmParams)
{
    if (!ui || !ui->tableWidget_modelParams || ui->tableWidget_modelParams->rowCount() <= 0) {
        return false;
    }
    algorithmParams.modelParams.clear();
    algorithmParams.modelGraySelection.targetGray = ui->doubleSpinBox_targetGray->value();
    algorithmParams.modelGraySelection.maxGrayDeviation = ui->doubleSpinBox_maxGrayDeviation->value();
    VrModelDetectionRegion& region = algorithmParams.modelDetectionRegion;
    region.enabled = ui->groupBox_modelDetectionRegion->isChecked();
    region.left = ui->spinBox_modelRegionLeft->value();
    region.top = ui->spinBox_modelRegionTop->value();
    region.right = ui->spinBox_modelRegionRight->value();
    region.bottom = ui->spinBox_modelRegionBottom->value();
    if (!region.isValid())
    {
        StyledMessageBox::warning(this, "2D识别区域", "右边界必须大于左边界，下边界必须大于上边界。");
        return false;
    }
    if (!algorithmParams.modelGraySelection.isValid())
    {
        return false;
    }
    for (int row = 0; row < ui->tableWidget_modelParams->rowCount(); ++row)
    {
        if (!ui->tableWidget_modelParams->item(row, 1) ||
            !ui->tableWidget_modelParams->item(row, 2) ||
            !ui->tableWidget_modelParams->item(row, 3))
        {
            return false;
        }
        VrWorkpieceModelParam model;
        bool exposureOk = false;
        bool gainOk = false;
        bool scoreOk = false;
        model.exposure = ui->tableWidget_modelParams->item(row, 1)->text().toUInt(&exposureOk);
        model.gain = ui->tableWidget_modelParams->item(row, 2)->text().toUInt(&gainOk);
        model.minimumScore = ui->tableWidget_modelParams->item(row, 3)->text().toDouble(&scoreOk);
        if (!exposureOk || !gainOk || !scoreOk || !model.isValid())
        {
            return false;
        }
        algorithmParams.modelParams.push_back(model);
    }
    // 保留公共配置结构对旧项目调用方的兼容镜像；转子检测始终使用上面的列表。
    algorithmParams.modelParam.exposure = algorithmParams.modelParams.front().exposure;
    algorithmParams.modelParam.gain = algorithmParams.modelParams.front().gain;
    algorithmParams.modelParam.minimumScore = algorithmParams.modelParams.front().minimumScore;
    return true;
}

void DialogAlgoarg::initModelParamsTab()
{
    if (ui && ui->tableWidget_modelParams)
    {
        auto* header = ui->tableWidget_modelParams->horizontalHeader();
        for (int column = 0; column < ui->tableWidget_modelParams->columnCount(); ++column)
        {
            header->setSectionResizeMode(column, QHeaderView::Stretch);
        }
        ui->tableWidget_modelParams->setHorizontalScrollBarPolicy(Qt::ScrollBarAlwaysOff);
    }
    connect(ui->btn_modelParamAdd, &QPushButton::clicked, this, [this]()
    {
        if (ui->tableWidget_modelParams->rowCount() < 65535)
        {
            addModelParamRow(VrWorkpieceModelParam());
            refreshModelParamRows();
            ui->tableWidget_modelParams->selectRow(ui->tableWidget_modelParams->rowCount() - 1);
        }
    });
}

void DialogAlgoarg::addModelParamRow(const VrWorkpieceModelParam& modelParam)
{
    const int row = ui->tableWidget_modelParams->rowCount();
    ui->tableWidget_modelParams->insertRow(row);
    const QStringList values = {QString::number(row + 1), QString::number(modelParam.exposure),
        QString::number(modelParam.gain), QString::number(modelParam.minimumScore, 'g', 15)};
    for (int column = 0; column < values.size(); ++column)
    {
        auto* item = new QTableWidgetItem(values[column]);
        item->setForeground(QColor(221, 225, 233));
        if (column == 0) item->setFlags(item->flags() & ~Qt::ItemIsEditable);
        ui->tableWidget_modelParams->setItem(row, column, item);
    }
    auto* actions = new WorkpieceSizeActions(ui->tableWidget_modelParams);
    ui->tableWidget_modelParams->setCellWidget(row, 4, actions);
    const QPersistentModelIndex rowIndex(ui->tableWidget_modelParams->model()->index(row, 0));
    connect(actions, &WorkpieceSizeActions::moveRequested, this, [this, rowIndex](int offset)
    { if (rowIndex.isValid()) moveModelParamRow(rowIndex.row(), offset); });
    connect(actions, &WorkpieceSizeActions::removeRequested, this, [this, rowIndex]()
    { if (rowIndex.isValid()) removeModelParamRow(rowIndex.row()); });
}

void DialogAlgoarg::refreshModelParamRows()
{
    for (int row = 0; row < ui->tableWidget_modelParams->rowCount(); ++row)
    {
        ui->tableWidget_modelParams->item(row, 0)->setText(QString::number(row + 1));
    }
    updateModelParamActions();
}

void DialogAlgoarg::updateModelParamActions()
{
    const int count = ui->tableWidget_modelParams->rowCount();
    for (int row = 0; row < count; ++row)
    {
        if (auto* actions = qobject_cast<WorkpieceSizeActions*>(ui->tableWidget_modelParams->cellWidget(row, 4)))
            actions->setRowPosition(row, count);
    }
}

void DialogAlgoarg::moveModelParamRow(int row, int offset)
{
    const int target = row + offset;
    if (row < 0 || target < 0 || target >= ui->tableWidget_modelParams->rowCount()) return;
    for (int column = 1; column <= 3; ++column)
    {
        auto* source = ui->tableWidget_modelParams->takeItem(row, column);
        auto* destination = ui->tableWidget_modelParams->takeItem(target, column);
        ui->tableWidget_modelParams->setItem(row, column, destination);
        ui->tableWidget_modelParams->setItem(target, column, source);
    }
    refreshModelParamRows();
    ui->tableWidget_modelParams->selectRow(target);
}

void DialogAlgoarg::removeModelParamRow(int row)
{
    if (ui->tableWidget_modelParams->rowCount() <= 1) return;
    ui->tableWidget_modelParams->removeRow(row);
    refreshModelParamRows();
}

void DialogAlgoarg::on_btn_camer_ok_clicked()
{
    if (SaveConfigFromUI()) {
        StyledMessageBox::information(this, "成功", "配置保存成功！");
        accept();
    } else {
        StyledMessageBox::warning(this, "失败", "配置保存失败，请检查文件权限或参数输入！");
    }
}

void DialogAlgoarg::on_btn_camer_cancel_clicked()
{
    reject();
}

void DialogAlgoarg::onCalibMatrixLoaded(int cameraIndex, const double* matrix)
{
    Q_UNUSED(cameraIndex);
    Q_UNUSED(matrix);
    StyledMessageBox::information(this, "提示", "已从文件导入标定矩阵");
}

void DialogAlgoarg::onSaveCalibRequested(int cameraIndex, const double* matrix)
{
    Q_UNUSED(cameraIndex);
    Q_UNUSED(matrix);

    if (SaveConfigFromUI())
    {
        StyledMessageBox::information(this, "成功", "手眼标定参数已保存！");
    }
    else
    {
        StyledMessageBox::warning(this, "失败", "保存手眼标定参数失败！");
    }
}

void DialogAlgoarg::LoadHandEyeCalibConfig()
{
    if (!m_pConfigManager || !m_handEyeCalibWidget)
    {
        return;
    }

    const ConfigResult configData = m_pConfigManager->GetConfigResult();
    const VrHandEyeCalibMatrix& calibMatrix = configData.handEyeCalibMatrix;
    m_handEyeCalibWidget->setCalibData(
        kHandEyeConfigIndex,
        calibMatrix.matrix,
        !isIdentityMatrix(calibMatrix.matrix));
}

bool DialogAlgoarg::SaveCalibMatrixToConfig(VrHandEyeCalibMatrix& calibMatrix)
{
    if (!m_handEyeCalibWidget)
    {
        return false;
    }

    bool isCalibrated = false;
    return m_handEyeCalibWidget->getCalibData(
        kHandEyeConfigIndex, calibMatrix.matrix, isCalibrated);
}

void DialogAlgoarg::LoadPlcRobotServerConfigToUI(const VrPlcRobotServerConfig& config)
{
    if (!m_networkConfigWidget) return;

    NetworkConfigData data;
    data.poseOutputOrder = config.poseOutputOrder;
    data.byteOrder = config.byteOrder;
    data.dirVectorInvert = config.dirVectorInvert;
    data.addrPhotoRequest = config.registerConfig.addrTrigger;
    data.addrDataComplete = config.registerConfig.addrWorkStatus;
    data.addrCoordDataStart = config.registerConfig.addrCoordDataStart;
    data.tcpServerPort = config.robotServerPort;
    m_networkConfigWidget->setConfig(data);
}

bool DialogAlgoarg::SavePlcRobotServerConfigFromUI(VrPlcRobotServerConfig& config)
{
    if (!m_networkConfigWidget) return false;

    const NetworkConfigData data = m_networkConfigWidget->getConfig();
    if (data.tcpServerPort <= 0 || data.tcpServerPort > 65535 ||
        data.addrPhotoRequest < 0 ||
        data.addrDataComplete < 0 ||
        data.addrCoordDataStart < 0) {
        return false;
    }

    config.robotServerPort = data.tcpServerPort;
    config.registerConfig.addrTrigger = data.addrPhotoRequest;
    config.registerConfig.addrWorkStatus = data.addrDataComplete;
    config.registerConfig.addrCoordDataStart = data.addrCoordDataStart;
    config.poseOutputOrder = data.poseOutputOrder;
    config.dirVectorInvert = data.dirVectorInvert;
    config.byteOrder = data.byteOrder;

    return true;
}